top of page
Link CAN Lambda

Link CAN Lambda

Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs. 

If using the CAN Lambda with a G4+/G4X PlugIn ECU you will need to use a Link CANPCB cable to access the CAN port on the PlugIn PCB .


When you add the CANPCB adapter to plug into the PCB port on a Plug-In ECU, you can simply snip off the non PCB end and connect the Can High and Low wires from the CAN Lambda controller directly to the flying lead on the adapter.

    bottom of page